TV/Tuner Card
[Return to the 1st page]

Sorry for the bad pictures. Some are not mine and others are rehashed from different parts of this manual. I have not performed this procedure myself so this is all I have.

First remove the 2 screws which hold the cover plate on in the back of the case.

There should be a small ribbon cable wound around a wire in the back of the cover. If not then feel around inside the case for it. you need to attach this cable to the back of the card then you can slide the card in to the slot. There is a rail on each side of the slot that the card slides into.

The picture below shows the card installed in its slot. It's not necessary to remove the side covers. I'm just trying to illustrate how it looks inside.

[Return to The 6400 Zone home page]

If any of the links do not work properly, please send an email to me the Site Master
This page last updated 11/1/2000